Some use points of quasi-hyperbolic gears

There are many types of gears on the market, and the quasi-hyperbolic gears we introduce to you today are one of the common ones. In fact, its relative to ordinary products, the advantages are more, that quasi-hyperbolic gear how.

Quasi-hyperbolic gears naturally play a very important role when they are used. When its advantages are also more. In fact, the shaft intersection angle of the quasi-hyperbolic gear is 90 °, so that the torque direction can be changed to 90 °, so this is also the angle conversion that is often required in the automobile, aircraft, or wind power industry. In addition, when you use quasi-hyperbolic gears, you also need to understand that at the same time, a pair of gears with different sizes and different numbers of teeth are meshed to test the torque increase and its speed reduction function. Of course, this is also It is commonly referred to as "torque increase and speed reduction". If some friends who have driven a car now, especially when driving a manual car when learning to drive, when climbing a hill, the coach will let you put you in a low gear at this time. In fact, in this case, it is to choose a pair of relatively high speeds. The gear pair can also provide more torque at low speeds, thereby providing more power to the vehicle. The company is committed to the expansion and development of domestic and foreign markets, using online Internet e-commerce platform and offline physical sales in two ways. Nowadays, they all make their products all over the provinces, municipalities and autonomous regions, and their products not only sell well in the domestic market.

Quasi-hyperbolic gear can realize the angle change of torque power. It can also withstand greater loads. Now it can also be used in the wind power industry and the automotive industry. Therefore, whether it is passenger cars, SUVs, or commercial vehicles such as pickup trucks, trucks, buses, etc., this type will be used in these places to provide greater power. Quasi-hyperbolic gear. Quasi-hyperbolic gear in fact its transmission is more stable, low noise. Of course, this is mainly because the pressure angles of the left and right surfaces of its teeth can be inconsistent, and you will find that the sliding direction of its gear meshing is actually along the tooth width and tooth profile direction, and a better gear meshing position can be obtained through design and technology during operation, so that the whole transmission still performs well in NVH performance under load. If there are any questions you don't understand, you can call us at any time for consultation. There are online customer service personnel to receive you, no matter what questions will help you patiently to answer. Of course, in the company's official website above, but also contains a lot of information about the product as well as the purchase of tips and so on. Coming to this website is equivalent to solving all the problems.

After the introduction of the above contents, we have also learned some key points of using quasi-hyperbolic gears. Other knowledge points will continue to be updated in the next period. If you have time, please come and watch it quickly. I believe it can help you.