Right Angle Planetary Reducer Daily Maintenance Points

Any mechanical equipment needs to be maintained, and the right angle planetary reducer, as a very important standard part in mechanical equipment, also needs to be maintained. Only by effectively maintaining the planetary reducer can the wear of the planetary reducer be reduced. Through proper maintenance and maintenance measures, the working life of the right-angle planetary reducer can be greatly improved.

Right angle planetary reducer is very common in the industrial industry, and many equipment have certain requirements for the installation size of the reduction motor. For example, the use of side reducer tube will protrude a large piece, which is not beautiful and wastes unnecessary space. At this time, you need to choose a right angle planetary reducer. The right angle reducer adopts the structure of hypoid reducer, and the transmission efficiency is more than 90%, far more than 20% of the traditional RV reducer. Is the daily maintenance of right angle planetary reducer the same as other gear motors, or will it be different.

Like most geared motors, the protection level of the right-angle planetary reducer defaults to IP44. Where customers have requirements, such as working environments with large dust or working conditions in outdoor operations, this requires a protection level of IP54. I believe everyone has noticed that the high waterproof level is 4, which can only be used for splashing water. Therefore, if you find water droplets on the fuselage when using a right-angle planetary reducer, you must wipe it off in time, otherwise the water will penetrate into the motor and it will be easily damaged.

The gearbox part of the right-angle reducer is set to be maintenance-free at the beginning of the design, and there is no oil hole. Customers do not have to worry about oil in the gearbox when using it, but the oil seal needs to be checked regularly. After a long time of operation, because the oil seal is a rubber product, the shaft is easy to age after a long time of rotation. Once the oil leakage is found, it is necessary to contact the manufacturer immediately. If the oil leakage is not serious, you can replace the oil seal.

Right angle planetary reducer in the use of the process, to regularly clean the reducer surface dust, pay attention to whether there is abnormal noise and noise. Once there is any abnormal noise and noise, the operation must be stopped immediately, and the problem can be put into use after the inspection. There are many reasons for the abnormal noise. It may be that the installation is not tight and the vibration occurs during operation, or it may be that the concentricity is not paid attention to when the shaft is installed, or it may be that the gear in the reduction box has collapsed and needs to be checked and eliminated before it can be put into use.

Right angle planetary reducer refers to the motor input shaft and reducer output shaft is 90 degrees vertical. Since the input shaft of the motor and the output shaft of the reducer are at a right angle of 90 degrees, the motor is generally parallel to the equipment and close to the equipment when installed. Unlike the parallel shaft reducer, the motor is perpendicular to the equipment, and the right angle reducer can save a lot of space. Moreover, the right-angle reducer is generally installed directly on the equipment, the installation angle can be 360 degrees without dead corners, and the installation is flexible and changeable.